Need map_config for Fallujah

C

Chalk1990

Member
I can't seem to get any npcs spawning cause the default map configs are blank. Can some one include these files for download?
 
// =========================================================================================================
// SAR_AI - DayZ AI library
// Version: 1.0.0
// Author: Sarge ([email protected])
//
//Wiki: to come
//Forum: to come
//
// ---------------------------------------------------------------------------------------------------------
// Required:
// UPSMon
// SHK_pos
//
// ---------------------------------------------------------------------------------------------------------
// area, group & spawn cfg file for Fallujah
// last modified: 5.3.2013
// ---------------------------------------------------------------------------------------------------------
/* reconfiguring the properties of the grid (keep in mind the grid has default settings, but these you should overwrite where needed).
IMPORTANT: The grid squares are named like : SAR_area_0_0
where the first 0 is the x counter, and the second 0 the y counter.
So to adress the bottom left square in the grid, you use SAR_area_0_0.
The square above that one would be: SAR_area_0_1
the square one to the right of the bottom left square is SAR_area_1_0
You want to change the number arrays in the below lines:
The order for these numbers is always [BANDIT, SURVIVOR, SOLDIER]
Lets take an example for Chernarus

// Kamenka, 0 bandit groups, 1 soldier groups, 2 survivor groups - spawn probability ba,so,su - maximum group members ba,so,su
_check = [["max_grps","rnd_grps","max_p_grp"],[[0,1,2],[0,75,100],[0,4,3]],"SAR_area_0_0"] call SAR_AI_mon_upd;

[[0,1,2],[0,75,100],[0,4,3]]
the first set of numbers : 0,1,2
stands for
0 bandit groups
1 soldier group
2 surivors groups
thats the max that can spawn in this grid
the second set of numbers : 0,75,100
that means:
0% probability to spawn bandit groups
75% for soldiers
100% for survivors
the last set of numbers : 0,4,3
thats the maximum number of ppl in the group (plus 1 leader)
0 bandits
max 4 (+1 leader) soldiers
max 3 (+1 leader) survivors
this number is randomized

*/
// --------------------------------------------------
// grid definition for the automatic spawn system
//
// examples see the chernarus file
// --------------------------------------------------


// MUALIMEEN, 2 bandit groups, 2 soldier groups, 1 survivor groups - spawn probability ba,so,su - maximum group members ba,so,su
_check = [["max_grps","rnd_grps","max_p_grp"],[[3,2,2],[80,90,100],[3,6,2]],"SAR_area_0_1"] call SAR_AI_mon_upd;
// SHURTA, 1 bandit groups, 1 soldier groups, 1 survivor groups - spawn probability ba,so,su - maximum group members ba,so,su
_check = [["max_grps","rnd_grps","max_p_grp"],[[3,3,3],[80,90,80],[7,9,3]],"SAR_area_0_0"] call SAR_AI_mon_upd;
// JEGHAIFI, 2 bandit groups, 1 soldier groups, 3 survivor groups - spawn probability ba,so,su - maximum group members ba,so,su
_check = [["max_grps","rnd_grps","max_p_grp"],[[3,2,3],[75,90,75],[6,7,4]],"SAR_area_0_1"] call SAR_AI_mon_upd;
// ASKARI, 2 bandit groups, 1 soldier groups, 3 survivor groups - spawn probability ba,so,su - maximum group members ba,so,su
_check = [["max_grps","rnd_grps","max_p_grp"],[[3,2,3],[50,70,50],[7,9,2]],"SAR_area_1_0"] call SAR_AI_mon_upd;
// JOLAN, 1 bandit groups, 2 soldier groups, 2 survivor groups - spawn probability ba,so,su - maximum group members ba,so,su
_check = [["max_grps","rnd_grps","max_p_grp"],[[3,2,2],[80,50,80],[2,9,2]],"SAR_area_0_1"] call SAR_AI_mon_upd;
// MUHANDISIN, 5 bandit groups, 5 soldier groups, 4 survivor groups - spawn probability ba,so,su - maximum group members ba,so,su
_check = [["max_grps","rnd_grps","max_p_grp"],[[3,2,3],[85,100,95],[6,10,5]],"SAR_area_0_0"] call SAR_AI_mon_upd;
// INDUSTRIAL PARK, 2 bandit groups, 2 soldier groups, 2 survivor groups - spawn probability ba,so,su - maximum group members ba,so,su
_check = [["max_grps","rnd_grps","max_p_grp"],[[2,2,2],[90,80,75],[3,8,3]],"SAR_area_0_1"] call SAR_AI_mon_upd;
// NAZAL OLD CITY, 3 bandit groups, 2 soldier groups, 3 survivor groups - spawn probability ba,so,su - maximum group members ba,so,su
_check = [["max_grps","rnd_grps","max_p_grp"],[[3,2,3],[80,90,75],[2,5,4]],"SAR_area_1_0"] call SAR_AI_mon_upd;
// RESAFA, 4 bandit groups, 3 soldier groups, 1 survivor groups - spawn probability ba,so,su - maximum group members ba,so,su
_check = [["max_grps","rnd_grps","max_p_grp"],[[3,2,1],[45,90,75],[3,6,3]],"SAR_area_0_1"] call SAR_AI_mon_upd;
// SINAI, 4 bandit groups, 2 soldier groups, 3 survivor groups - spawn probability ba,so,su - maximum group members ba,so,su
_check = [["max_grps","rnd_grps","max_p_grp"],[[3,2,3],[45,60,70],[2,6,3]],"SAR_area_1_0"] call SAR_AI_mon_upd;
// SHUHADA, 3 bandit groups, 4 soldier groups, 1 survivor groups - spawn probability ba,so,su - maximum group members ba,so,su
_check = [["max_grps","rnd_grps","max_p_grp"],[[3,3,1],[45,60,70],[2,4,4]],"SAR_area_0_1"] call SAR_AI_mon_upd;
// NEW BRIDGE, 4 bandit groups, 2 soldier groups, 3 survivor groups - spawn probability ba,so,su - maximum group members ba,so,su
_check = [["max_grps","rnd_grps","max_p_grp"],[[2,2,3],[50,70,75],[2,5,2]],"SAR_area_1_0"] call SAR_AI_mon_upd;
// OLD BRIDGE, 1 bandit groups, 1 soldier groups, 3 survivor groups - spawn probability ba,so,su - maximum group members ba,so,su
_check = [["max_grps","rnd_grps","max_p_grp"],[[2,1,3],[50,70,100],[2,4,2]],"SAR_area_0_1"] call SAR_AI_mon_upd;
// AIRPORT, 3 bandit groups, 5 soldier groups, 3 survivor groups - spawn probability ba,so,su - maximum group members ba,so,su
_check = [["max_grps","rnd_grps","max_p_grp"],[[2,2,1],[80,90,100],[2,3,2]],"SAR_area_1_0"] call SAR_AI_mon_upd;



// ---------------------------------------------------------------
// Definition of area markers for static spawns
// ---------------------------------------------------------------
// add if needed, see examples in the chernarus file
// Resafa, heli patrol area
_this = createMarker ["SAR_patrol_resafa", [3715.4602050781,3884.8587036133]];
_this setMarkerShape "RECTANGLE";
_this setMarkeralpha 0;
_this setMarkerType "Flag";
_this setMarkerBrush "Solid";
_this setMarkerSize [1000, 4500];
SAR_marker_helipatrol_Resafa = _this;
// Askari, heli patrol area
_this = createMarker ["SAR_patrol_askari", [6680.8471679688,5378.9443969727]];
_this setMarkerShape "RECTANGLE";
_this setMarkeralpha 0;
_this setMarkerType "Flag";
_this setMarkerBrush "Solid";
_this setMarkerSize [500, 1700];
_this setMarkerDir 262.10;
SAR_marker_helipatrol_Askari = _this;
// ----------------------------------------------------------------------------------------
diag_log format["SAR_AI: Area & Trigger definition finalized"];
diag_log format["SAR_AI: Static Spawning for Helicopter patrols started"];
//
// Static, predefined heli patrol areas with configurable units
//
// Parameters used:
// Areaname
// 1,2,3 = soldier, survivors, bandits
//
//Heli Patrol Resafa
[SAR_marker_helipatrol_resafa,1] call SAR_AI_heli;
//Heli patrol Askari
[SAR_marker_helipatrol_askari,1] call SAR_AI_heli;

// add if needed, see examples in the chernarus file


diag_log format["SAR_AI: Static Spawning for Helicopter patrols finished"];
//---------------------------------------------------------------------------------
// Static, predefined infantry patrols in defined areas with configurable units
//---------------------------------------------------------------------------------
// Example: [SAR_area_DEBUG,1,0,1,""] call SAR_AI;
//
// SAR_area_DEBUG = areaname (must have been defined further up)
// 1 = type of group (1 = soldiers, 2 = survivors, 3 = bandits)
// 0 = amount of snipers in the group
// 1 = amount of rifleman in the group
//
//
// Example entries:
// SARGE DEBUG - Debug group
// military, 0 snipers, 1 riflemen, patrol
//[SAR_area_DEBUG,1,0,1,""] call SAR_AI;
// military, 2 snipers, 4 riflemen, patrol
//[SAR_area_DEBUG,1,2,4,""] call SAR_AI;
// survivors, 1 snipers, 3 riflemen, patrolling the NWAF
//[SAR_marker_helipatrol_nwaf,2,1,3,""] call SAR_AI;
// bandits, 5 snipers, 2 riflemen, patrolling the NWAF
//[SAR_marker_helipatrol_nwaf,3,5,2,""] call SAR_AI;
//---------------------------------------------------------------------------------
// add here if needed
// ---- end of configuration area ----
diag_log format["SAR_AI: Static Spawning for infantry patrols finished"];
 
HEY I ADDED THE NEW AI AND IT WAS RECORDING THE AI KILLS TO THE DEBUG AN NOW IT IS NOT ANY IDEAS?
 
You must log in or register to reply here.
Back
Top