Shadowsilver
New Member
Greetings.
I started a dayz Epoch server about a week ago, and while being a major noob at the scripting, i managed to get at least some addons working, including DZAI.
However, i decided to set up a test environment on my desktop to get a bit more debug done on the server, as every time i had been trying to add something, and needed to test it, i would get players on and I'd fell like i couldn't take it down again and continue my work.
Eventually, i wanted to take my test environment and overwrite the server files with it, as the server wasn't running so well, but at least it was working. And then i would have peace to get everything working on my desktop.
When i got to adding DZAI (and WAI) however, i found that i could not get any AI to spawn from either addon on my desktop. After many frustrated hours, i decided to do the overwrite anyway on my server, believing that it was something on my desktop that was at fault. Turns out it wasn't.
I've gone through the installation guides of both addons multiple times, started over with a fresh dayz_server.pbo a couple of times and probably had too much coffee for most of January already.
The arma2oaserver.rpt log never gives any indication of either mod even being loaded, despite their activation is correctly being called in the server_monitor.sqf. I have tried replacing the callcompile with a execVM as mentioned somewhere else on the forum, but no luck.
I use PBOmanager 1.4, and have the following addons working on the server/desktop atm:
A plot for life + snap pro. - https://github.com/RimBlock/Epoch
Admintools - https://github.com/noxsicarius
debug monitor - https://github.com/noxsicarius
auto refuel - https://github.com/noxsicarius
custom loadout - https://github.com/noxsicarius
WAI - https://github.com/noxsicarius
DZAI - https://github.com/dayzai/DZAI
All addons downloaded (and redownloaded a few times) from github yesterday and today. So should be the newest versions possible.
Regarding configs. I first tried with a config i had been messing around in, but as i realized nothing worked, i replaced with default configs. Also tried taking the configs of my server that worked, but to no avail. I'm linking my rpt log, and my dayz_server.pbo - The server monitor have the activation call as execVM instead of the standard compile, it was the last thing i tried before starting to write this thread.
Oh and btw Buttface, in your "Need help? Before you ask, read this" thread, the link to your github is broken
day_server.pbo : https://www.dropbox.com/s/jc9e19tv6jaow9q/dayz_server.pbo?dl=0
arma2oaserver.rpt : https://www.dropbox.com/s/2j9vxsu0ncx2nw4/arma2oaserver.RPT?dl=0
I hope someone can point out what went wrong, because i have no ideas left anymore
I started a dayz Epoch server about a week ago, and while being a major noob at the scripting, i managed to get at least some addons working, including DZAI.
However, i decided to set up a test environment on my desktop to get a bit more debug done on the server, as every time i had been trying to add something, and needed to test it, i would get players on and I'd fell like i couldn't take it down again and continue my work.
Eventually, i wanted to take my test environment and overwrite the server files with it, as the server wasn't running so well, but at least it was working. And then i would have peace to get everything working on my desktop.
When i got to adding DZAI (and WAI) however, i found that i could not get any AI to spawn from either addon on my desktop. After many frustrated hours, i decided to do the overwrite anyway on my server, believing that it was something on my desktop that was at fault. Turns out it wasn't.
I've gone through the installation guides of both addons multiple times, started over with a fresh dayz_server.pbo a couple of times and probably had too much coffee for most of January already.
The arma2oaserver.rpt log never gives any indication of either mod even being loaded, despite their activation is correctly being called in the server_monitor.sqf. I have tried replacing the callcompile with a execVM as mentioned somewhere else on the forum, but no luck.
I use PBOmanager 1.4, and have the following addons working on the server/desktop atm:
A plot for life + snap pro. - https://github.com/RimBlock/Epoch
Admintools - https://github.com/noxsicarius
debug monitor - https://github.com/noxsicarius
auto refuel - https://github.com/noxsicarius
custom loadout - https://github.com/noxsicarius
WAI - https://github.com/noxsicarius
DZAI - https://github.com/dayzai/DZAI
All addons downloaded (and redownloaded a few times) from github yesterday and today. So should be the newest versions possible.
Regarding configs. I first tried with a config i had been messing around in, but as i realized nothing worked, i replaced with default configs. Also tried taking the configs of my server that worked, but to no avail. I'm linking my rpt log, and my dayz_server.pbo - The server monitor have the activation call as execVM instead of the standard compile, it was the last thing i tried before starting to write this thread.
Oh and btw Buttface, in your "Need help? Before you ask, read this" thread, the link to your github is broken
day_server.pbo : https://www.dropbox.com/s/jc9e19tv6jaow9q/dayz_server.pbo?dl=0
arma2oaserver.rpt : https://www.dropbox.com/s/2j9vxsu0ncx2nw4/arma2oaserver.RPT?dl=0
I hope someone can point out what went wrong, because i have no ideas left anymore